User Tag List

Results 1 to 4 of 4

Thread: N15 SSS SuperPro Bushings.

  1. #1
    Deigima's Avatar
    Join Date
    Oct 2015
    Location
    Sydney
    Posts
    555
    Thanked
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    N15 SSS SuperPro Bushings.

    Poly bushings for n15 SSS can be found here
    http://www.superpro.com.au/find/supe...999500698/vid-

    I'm currently trying to track down what the factory swaybar thickness is in the front, amoung other things in ordering the bushings.
    Front Sway Bar Mount Bush Kit - SPF1135-26K (currently assuming "26k" refers to the swaybar size, eg 22 would be 22k)


    Front Sway Bar Link Lower Bush Kit - SPF2092B-4K
    need to confirm if this is all the bushings needed for the swaybar linkages on each side


    Front Steering Rack & Pinion Mount Bush (Power Steering) - SPF1834K
    Can this mount be installed DIY without removing other things surrounding the rack?


    I'm looking into getting castor bushings, seen what it can do for friends cars, much want. Control Arm Lower-Rear Bush Kit
    2 x Offset bushings, Increase positive caster both sides - SPF1340AK



    curious about the other option Control Arm Lower-Rear Bush Kit
    2 x Offset bushings, PS increased DS decrease caster - SPF1340K

    What does this bushing actually do? description is vague.

    And then theres this one, just as vague. Front Control Arm Lower-Rear Bush Kit
    Alignment Correction SPF1339K

    Describes as 0.5 degree castor adjustment available. I guess a lesser of the "castor offset bushing" which offers 1 degree?


    There are a fair few other bushings which seem much more straight forward on the superpro page.
    Last edited by Deigima; 29-04-2016 at 07:10 PM.

  2. #2
    If in doubt, boost it out Paullus's Avatar
    Join Date
    Mar 2003
    Location
    Toowoomba, QLD
    Posts
    555
    Thanked
    43
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    I forgot that I documented a bit of this in the Reference Section: http://pulsar.org.au/forums/content....-Related-Parts

  3. The Following User Says Thank You to Paullus For This Useful Post:

    Deigima (29-04-2016)

  4. #3
    Deigima's Avatar
    Join Date
    Oct 2015
    Location
    Sydney
    Posts
    555
    Thanked
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    For swaybar width it should either be 26mm or 28mm. 26 was only meant to be found on non-sss but people have apparently found both on SSS. Need to measure car yourself.

  5. #4
    Deigima's Avatar
    Join Date
    Oct 2015
    Location
    Sydney
    Posts
    555
    Thanked
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    while we're on the topic, in the rear suspnesion section there are two similar parts with different part numbers, and same description

    Rear Beam Axle Pivot Bush Kit
    Do not remove original shell as you have to re-use
    SPF1942-90K


    Rear Beam Axle Pivot Bush Kit
    Do not remove original shell as you have to re-use
    SPF1942K

    it appears the first one is suffixed 90 while the second has no suffix, guessing a compound difference???

    Edit- confirmed, the 90K part is harder "race" compound
    Last edited by Deigima; 30-04-2016 at 10:46 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •