User Tag List

Results 1 to 6 of 6

Thread: SR20DE Stock at the crank to the wheels . . .

  1. #1
    PhilSSStevenson's Avatar
    Join Date
    Dec 2015
    Location
    Gold Coast Hinterland
    Posts
    555
    Thanked
    90
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    SR20DE Stock at the crank to the wheels . . .

    So it's 104 kw at the crank.

    What would that equate to at the wheels?

    Cheers
    NISSAN Pulsar N14 SSS Oz spec - the SSS cult classic. Owned mine since 1992.

  2. #2
    PhilSSStevenson's Avatar
    Join Date
    Dec 2015
    Location
    Gold Coast Hinterland
    Posts
    555
    Thanked
    90
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by PhilSSStevenson View Post
    So it's 104 kw at the crank.

    What would that equate to at the wheels?

    Cheers
    Got the answer.

    It is 77 kw at the wheels.
    NISSAN Pulsar N14 SSS Oz spec - the SSS cult classic. Owned mine since 1992.

  3. #3

    Join Date
    Feb 2019
    Location
    Willetton Perth
    Posts
    555
    Thanked
    6
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Read the above and thought gee I have a dyno runs on my N15 SSS stock and then with Fujitsubo Headers. Went looking and found the attached.
    Stock 91.83 kws. With headers fitted 98.24 kws.
    Given I think Nissan figure at the crank is 105 kws maybe my dnyo figures are a little high.
    Any body else have a dyno run for a stock SSS?
    Attached Files Attached Files

  4. The Following User Says Thank You to West Aussie Glen For This Useful Post:

    PhilSSStevenson (09-01-2022)

  5. #4
    Need Input Cozzm0's Avatar
    Join Date
    Jun 2003
    Location
    Sydney Australia
    Posts
    555
    Thanked
    159
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Many different figures for different cars but the 80-85kw range is pretty 'normal' for a standard car. Dynos are great, for comparison figures, but comparing between workshops and between different brands of Dynos is never going to result in smiles all around. When i was modifying my car, i did several runs on the same dyno, with the same operator, over a number of years to be able to have a solid comparison between 'stages'.

  6. #5

    Join Date
    Feb 2019
    Location
    Willetton Perth
    Posts
    555
    Thanked
    6
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Cozzm0 View Post
    Many different figures for different cars but the 80-85kw range is pretty 'normal' for a standard car. Dynos are great, for comparison figures, but comparing between workshops and between different brands of Dynos is never going to result in smiles all around. When i was modifying my car, i did several runs on the same dyno, with the same operator, over a number of years to be able to have a solid comparison between 'stages'.
    Likewise I just use dyno runs for before and after so always use the same dyno. Just a little surprised that my standard run of almost 92 was so high compared to the 77 below and your 80 to 85 figure. Given it was years ago and the car has now done almost 200,000 I might go and do another run.
    Given the current temperatures in Perth I shall need to book it in early in the morning or wait for things to cool off to get close to the temperature the last runs were done at.

  7. #6
    PhilSSStevenson's Avatar
    Join Date
    Dec 2015
    Location
    Gold Coast Hinterland
    Posts
    555
    Thanked
    90
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    The Red Jett's last dyno run (2007) gave me 95kw. I was happy with that, with mods like JWT S3 cams and sprockets, etc. And with a Fidenza flywheel and GFB crank pulley (which don't rate on a dyno) I must be close to 100kw. Red Jett still gives me 0-100 in 7 seconds.
    NISSAN Pulsar N14 SSS Oz spec - the SSS cult classic. Owned mine since 1992.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •