User Tag List

Results 1 to 5 of 5

Thread: RS5F32A Part Numbers?

  1. #1

    Join Date
    Jan 2018
    Location
    South Australia
    Posts
    555
    Thanked
    27
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    RS5F32A Part Numbers?

    Hi there, anyone know the part numbers for all the seals/ Bushings for the gearbox? Input shaft seal, axle seals, clutch lever seal and bushing and the case seal or do you use sealant for that? Cheers.

  2. #2
    Need Input Cozzm0's Avatar
    Join Date
    Jun 2003
    Location
    Sydney Australia
    Posts
    555
    Thanked
    151
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Case halves are gasket goo / silicone rtv only. Run a thin bead around the lip on the inner edge of each of the bolt holes to seal it. Don’t use too much and give it 24 hours to cure before you put oil into it.

  3. #3

    Join Date
    Jan 2018
    Location
    South Australia
    Posts
    555
    Thanked
    27
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Anyone know that part numbers for the clutch bushing and seal?

  4. #4

    Join Date
    Jan 2018
    Location
    South Australia
    Posts
    555
    Thanked
    27
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Bump, anyone recommend the OEM KP510-00150 sealant for the gearbox or can anyone recommend a sealant? Will get the OEM sealant if that is best but would prefer aftermarket as the sealant cost $90 for a tube from my local or about $50 off amayama with shipping. Cheers.

  5. #5
    If in doubt, boost it out Paullus's Avatar
    Join Date
    Mar 2003
    Location
    Toowoomba, QLD
    Posts
    555
    Thanked
    42
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    These are the seal numbers for the driveshafts:
    https://pulsar.org.au/forums/content...-Gearbox-Seals

    Genuine
    Passenger side 38342-8E002
    38342-31x02
    38342-31X00AU
    (I think the bottom is the current number, others are superseded)
    Drivers side (non LSD) 38342 8E001


    Aftermarket
    Passenger side M42-90-9.5-13
    Drivers side (non LSD) M33-56-8-13
    Input shaft M25-40-7

    And here's a few misc numbers from my spreadsheet:

    AH1314F Input shaft seal (I think I got this from a bearing shop (i.e not a genuine number from memory)).
    7E-BKS28X45X18 Gearbox bearing (NTN) (not sure which one)
    R06A68VPX1 Gearbox bearing (NTN) (not sure which one)
    Paul

    11.9@125

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •