I removed a 6 speed to put a 5 speed back in, dumbest thing i ever did.
I removed a 6 speed to put a 5 speed back in, dumbest thing i ever did.
Putting 4 pots on the front and Gti-r brakes on the rear is a bad idea, I speak from experience and I've crunched the numbers through a brake bias calculator and you end up with an inefficient brake...
The top of my intercooler is bolted to the bottom of my reo bar
I run a 720x200x90mm intercooler, (550mm core)
It doesn't require cutting the reo bar, infact it butts up to and is bolted to the bottom of it,
It doesn't stick out of the bottom of the bar,
It...
I will get and post some photos later.
The radiators are 430x170x19mm with barbed inlet and outlet. There are 2, stacked vertically so you have 430x350x19mm. The extra 10mm in the 350mm is the gap between where the end plates touch....
Got the pics , Will get them up soon
Spectrix has an N15.
It's in Engine & Gearbox Specific
I have a PWR with two spal fans, never once has the car ever looked like over heating. however i do have a very effective oil cooler too.
Having the air con on with a front mount , i would always...
In my jappy, I have had all 4 radiators, 10mm, 16mm, 26mm, 50mm alloy,
I prefer the 26mm as it allows me to use stock fans, clear everything, and it was half the price of the 50mm ones, and the car...
Yep , That would be me. But sorry i don't have time these days to work on the cars. Your best bet is just a good quality auto electrician.
I used Moog ball joints when I replaced mine two or three years ago. They were a perfect fit, they have caused me no issues and they have grease nipples. From memory they were around $25 US each plus...