If the CV Shaft nut has come loose for any amount of time it will have eaten the bearing i rekon. Tighten it back up and see how you go but budget for a new bearing at least.
If the CV Shaft nut has come loose for any amount of time it will have eaten the bearing i rekon. Tighten it back up and see how you go but budget for a new bearing at least.
+1 for bearings dying often cause the nut to loose.
I thought it was a 32mm nut for the driveshaft.
Are you talking about where the hub connects to the ball joint on the lower control arm, or the nut on the end of the driveshaft? If it's the former then it's just the 22mm nut and the split pin. If...
Then based on the Info you have given me I can only assume that the 2nd plug has oil on it due to the tube seal leaking, and that the 3rd and 4th plug are getting oil on them due to unwanted oil...