View Full Version : Bluebird seats into n15

19-09-2016, 05:13 PM
Was at wreckers over the weekend searching for a seat bracket for my car and quickly checked inside a bluebird to see if it would be suitable... its bracket wasnt what i needed but i found something else: a REALLY nice plush cushiony comfortable interior.http://uploads.tapatalk-cdn.com/20160919/1eb6c16738021d804712a85c50cbc05b.jpghttp://uploads.tapatalk-cdn.com/20160919/cddb272d1efe50e943d78c915a289af5.jpg

Breif look at the way the seats were mounted it looked like you might be able to fit bluebird seats in a n15 pulsar.

Edit: absolutely no chance of fitting the rear seat.

Sent from my SM-G900I using Tapatalk

20-09-2016, 06:17 PM
Photos of how the rails fit in their respective cars

Pulsar front Driver side.

Pulsar rear driver side.

Bluebird front driver side.

Bluebird rear driver side.

First up trying to fit the bluebird seat in on its standard rails. Outer rail is wrong Wrong width, far too high.
Inner rail fits.

The inner rails cannot be changed but from what i can see the bluebird inners fit pretty well in pulsar.

Outer rails come off with two 12mm bolts. Pay special attention to how the bar between the rails is orientated. Twist it and it wont work. http://uploads.tapatalk-cdn.com/20160920/1328e25deb65e40015b60e1a84a94902.jpg

Swap over the outer rails. Put the joining bar on the rail before bolting it back up.

Sent from my SM-G900I using Tapatalk

20-09-2016, 06:18 PM
Shove it in there and lets see how it fits.
Rears are happy.

Still problem with outer front.

Passanger side was the same. Except it ends up with two handles when you swap the rail over lol.

Sent from my SM-G900I using Tapatalk

20-09-2016, 06:19 PM
You can force the seat to fit the front outer but that means the rear inner wont fit.

Maybe its worth trying other seat rails see if i can find one that works with the front mount.

Sent from my SM-G900I using Tapatalk