PDA

View Full Version : RS5F32A Part Numbers?



SSSCORZA
16-02-2019, 08:59 AM
Hi there, anyone know the part numbers for all the seals/ Bushings for the gearbox? Input shaft seal, axle seals, clutch lever seal and bushing and the case seal or do you use sealant for that? Cheers.

Cozzm0
16-02-2019, 06:55 PM
Case halves are gasket goo / silicone rtv only. Run a thin bead around the lip on the inner edge of each of the bolt holes to seal it. Don’t use too much and give it 24 hours to cure before you put oil into it.

SSSCORZA
19-02-2019, 07:27 AM
Anyone know that part numbers for the clutch bushing and seal?

SSSCORZA
03-03-2019, 05:41 PM
Bump, anyone recommend the OEM KP510-00150 sealant for the gearbox or can anyone recommend a sealant? Will get the OEM sealant if that is best but would prefer aftermarket as the sealant cost $90 for a tube from my local or about $50 off amayama with shipping. Cheers.

Paullus
08-03-2019, 11:33 AM
These are the seal numbers for the driveshafts:
https://pulsar.org.au/forums/content.php?167-Gearbox-Seals

Genuine


Passenger side
38342-8E002
38342-31x02
38342-31X00AU
(I think the bottom is the current number, others are superseded)



Drivers side (non LSD)
38342 8E001




Aftermarket


Passenger side
M42-90-9.5-13


Drivers side (non LSD)
M33-56-8-13


Input shaft
M25-40-7



And here's a few misc numbers from my spreadsheet:



AH1314F

Input shaft seal (I think I got this from a bearing shop (i.e not a genuine number from memory)).



7E-BKS28X45X18

Gearbox bearing (NTN) (not sure which one)



R06A68VPX1
Gearbox bearing (NTN) (not sure which one)