Hey All,
Making a pod filter setup for my pulsar, when I took the intake off last it seemed a spaghetti of hoses, what do I actually need to keep?
Thanks in advance!
Hey All,
Making a pod filter setup for my pulsar, when I took the intake off last it seemed a spaghetti of hoses, what do I actually need to keep?
Thanks in advance!
how far up the intake did you take off? just the airbox or all the way to the plenum?
pics?
All the way up plenum; airbox, intake piping, reso box.
iacv hose.without it you will stall.
hose to fuel canister maybe.rta
rocker cover hose for crankcase ventilation.rta
quality is remembered long after price is forgotten
Planning to use a silicone reducer and some steel pipe, drilling and tapping 3 fittings in for the lines as a bit of a project on the holidays.
Take a look at two pics of the Red Jett.
Cold Air Intake at bottom left (passengers side) of front spoiler. Used end of a funnel to increase opening to 120 mm, for ram effect.
80 mm flex pipe to feed into Cold Air Box, encapsulated in a heat protector, then 3-A Racing pod via a BOMZ metal air intake into the throttle body.
Cheers…
Bonus, takes me back to 1985. . .
Pics of my Alfa Romeo GTV 2.0 engine, with its tuned extractors and two double barrel Webber carbies. One carby for each cylinder.
Temperamental old gal she was . . .
Last edited by PhilSSStevenson; 15-01-2017 at 02:36 PM. Reason: Bonus pics...
NISSAN Pulsar N14 SSS Oz spec - the SSS cult classic. Owned mine since 1992.
Last edited by PhilSSStevenson; 15-01-2017 at 02:40 PM.
NISSAN Pulsar N14 SSS Oz spec - the SSS cult classic. Owned mine since 1992.
I can see the cheap fuel filter at the back for the rocker cover in the middle, I meant the thing on the RHS. The fuel filter is nifty though!
I'm not messing with the AFM, I mean like an adapter for a pod that bolts up to the AFM housing, are these easy to find?
The RHS K&N filter is probably not legit, but lets ERG gases out a little (vent to air). I clean that filter every 20,000.
Note I have removed all the ERG stuff on the intake manifold.
Here tizz: Your adapter.
http://coastmodz.com.au/product_info.php?products_id=43
Cheers
My pod:
http://coastmodz.com.au/product_info.php?products_id=4
Last edited by PhilSSStevenson; 16-01-2017 at 01:26 PM. Reason: typos. . .
NISSAN Pulsar N14 SSS Oz spec - the SSS cult classic. Owned mine since 1992.
Bump, I measured the the stock intake pipe at about 8.5cm, which is about 3.3", what size silicon joiners did you use off the TB, did 3" fit or are you using 3.5"?
This is what ya need:
http://www.nissanforums.com/ga16de-1...ke-thread.html
NISSAN Pulsar N14 SSS Oz spec - the SSS cult classic. Owned mine since 1992.