User Tag List

Results 1 to 12 of 12

Thread: Forced induction Dyno proven hp and engine modification thread

  1. #1

    Join Date
    Oct 2015
    Location
    Earth
    Posts
    555
    Thanked
    46
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Forced induction Dyno proven hp and engine modification thread

    Post up your Dyno sheet of your Forced induction pulsar

    Please post as much info as possible, such as:

    Engine type
    Turbo
    Boost pressure
    Injectors
    Ecu
    Cams/ headwork
    Compression
    Exhaust /Intake
    Anything else that you believe is responsible for helping you achieve the power level you have

    Please also note if it was done on a hub dyno
    Last edited by Boosted VLAD; 12-02-2016 at 12:04 PM.

  2. #2
    Leroy Peterson's Avatar
    Join Date
    Oct 2015
    Location
    Melbourne
    Posts
    555
    Thanked
    51
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    My old setup:
    GTiR motor in FWD
    hub dyno (therefore torque is actually accurate, but this dyno is known to pull a bit more than other local roller dynos)




    high boost at around 18psi, low at 13psi I think.

    gt2871r
    Tomei 260 degree cams, 11mm lift (no adjustable cam gears)
    CP pistons (actual comp ratio probably around 8.8:1)
    Stock rods
    Supertech springs
    ID1000 injectors
    Stock intake and exhaust manifolds, 3.5" dump pipe, 3" straight-through exhaust (magnaflow muffler, no cat)
    No porting or matching
    Z32 AFM, PowerFC ECU, Crane LX91 ignition coil
    Walbro 255 fuel pump, SARD fuel pressure reg, 98 RON

    The motor died very soon after that from a number of internal failures, but no sign of damage from fuel/ignition/tune.
    Last edited by Leroy Peterson; 23-11-2015 at 08:48 PM.

  3. #3

    Join Date
    Oct 2015
    Location
    Earth
    Posts
    555
    Thanked
    46
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Click image for larger version. 

Name:	image.jpg 
Views:	318 
Size:	85.5 KB 
ID:	1046

    N14 Pulsar
    Sr20de+T
    Completely stock internals, (unopened motor)
    Ball bearing Garrett 2860 Turbo, AR 64 rear housing
    Autronic SM4 Ecu
    Custom manifold/ Dump/ 3" Exhaust
    PWR Intercooler, custom stainless steel piping
    Bosch 440cc injectors
    Bosch 040 Fuel pump

    186whp @7psi on 98 octane fuel
    Tuned for Drivability
    Last edited by Boosted VLAD; 23-11-2015 at 05:40 PM.

  4. #4

    Join Date
    Oct 2015
    Location
    Earth
    Posts
    555
    Thanked
    46
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Click image for larger version. 

Name:	image.jpg 
Views:	327 
Size:	95.2 KB 
ID:	1045

    N14 Pulsar
    U13 Blubird Det
    8:1 Compression Ratio
    Cp pistons, Eagle rods, Acl bearings
    270 degree Tommei Pro Cams
    1000cc Injectors, Bosch 040 pump, fuel reg
    China exhaust manifold, custom 3" Exhaust system
    Small Ebay intercooler,
    4 Bosch HEC coils,
    SM4 Ecu, 500r cdi,
    Greddy T518z turbo, 10cm rear,
    98 octane fuel

    210whp @8psi
    245whp @12psi
    287whp @16psi

  5. #5
    Boosting on the daily BaronVonKebabalot's Avatar
    Join Date
    Oct 2015
    Location
    Queensland
    Posts
    555
    Thanked
    33
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)


    313hp before blowing spark out (now fixed but haven't re-dynoed)
    Stock 20V SR20VE bottom end (11:1 compression)
    Stock P11 SR20VE head with P11 cams
    Stock X-Trail GT SR20VET exhaust manifold
    Kinugawa TD06-20g turbo with 8cm rear housing
    3" Patrol dump pipe, custom 3" exhaust
    38mm external Turbosmart Ultragate (off exhaust mani)
    JustJap 550x180mm intercooler
    eBay 2.5" cooler piping kit
    RS5F70V gearbox
    Walbro 460lph fuel pump
    ID1000 injectors, Doug Fab top feed rail, E85 fuel
    18psi peak tapering to 16psi of boost
    Bikirom ecu
    #teamdantuned
    Still faster than Carly's 180sx. Life goals.

  6. #6

    Join Date
    Oct 2015
    Location
    Earth
    Posts
    555
    Thanked
    46
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ignore the green tune, it valve floated with cheap valve springs

    Red tune is current, it pulls timing to tell you to change gears, the less load, the more it pulls timing, hence funny last 1000rpm



    Click image for larger version. 

Name:	image.jpg 
Views:	332 
Size:	98.5 KB 
ID:	1047


    Jap N14 SSS

    Bluebird U13 SR20DET
    10:1 Compression

    87mm Cp Pistons, Eagle rods,
    All internals machined and balanced,
    Arp bolts everywhere

    Tommei 270degree Pro cams
    Super tech valve springs
    Ported and polished head
    Ported and polished stock intake manifold

    Greedy Trust T518z Turbo, 10cm rear

    Autronic SM4 Ecu
    Autronic 500r direct fire CDI ECU
    4 MSD Coil packs, MSD Leads

    Walbro 465Lph E85 fuel pump,
    1000cc Injecotrs, 5Bar base pressure

    Stainless steel manifold
    3" Custom stainless steel Exhaust system
    650x200x90mm Front mount


    United E85 Fuel, Tuned by Maddie Spry at PITS

    Low, Medium and High boost settings:

    310whp @12psi
    370whp @18psi
    432whp @25psi
    Last edited by Boosted VLAD; 23-11-2015 at 06:54 PM.

  7. #7
    Leroy Peterson's Avatar
    Join Date
    Oct 2015
    Location
    Melbourne
    Posts
    555
    Thanked
    51
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    gee thats big numbers. how is the T51 not choking to death? I know they like a bit of a boost, but surely 400hp FWD would flow too much for it? (though it does look to take a while to spool in the graph)

  8. #8

    Join Date
    Oct 2015
    Location
    Earth
    Posts
    555
    Thanked
    46
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    The T518z is absolutely maxed at the boost it's at,
    I am yet to find anyone who has pulled these number on this same turbo,
    Also, when I melted my last motor I melted the turbine wheel with it, so I bought a TD05 18g rear wheel and while I was at it I bought a Kinugawa TD05 18g anti surge cover for the front of it,
    So I can say with 100% certainty that it's not high flowed or tampered with as these fitted perfectly snug,

    It looks like it takes ages to spool/come onto power but it's on a fairly low ramp rate on the Dyno, without the load it's looks very delayed, on the street I see boost much earlier,
    (This is also why you see the soft limiter coming in)
    Also I run massive overlap, an extra 10 degrees I've dialled in with the cam gears, and yes, you heard right, overlap on a turbo motor,

    On 7psi I make 260whp
    The car/ turbo always seems to make 10hp for every pound of boost, take that into account and I am literally making 190whp on the motor alone!
    I also have am astonishingly good tuner and I have my little secrets as to why it makes the numbers it does (;

    And another thing, if you check out my car in the Garage section you will see a 130mph quarter mile pass I did to back up the power figures

  9. #9
    If in doubt, boost it out Paullus's Avatar
    Join Date
    Mar 2003
    Location
    Toowoomba, QLD
    Posts
    555
    Thanked
    43
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Engine type: RNN14 SR20DET
    Turbo: GT2871R, 0.86 rear
    Injectors: 555cc, then 1000cc for E85
    Ecu: Microtech LT-8
    Cams/headwork: Standard, with heavier springs post Feb 2014
    Compression: ~8.3:1?
    Exhaust /Intake: Stock GTiR intake and exhaust manifolds, 3" exhaust

    295@21, U98, Nov 2008.
    ~350@24, E85, Aug 2014.
    ~380@26-27, E85, Jun 2015.
    Paul

    11.9@125

  10. #10

    Join Date
    Nov 2015
    Location
    Ipswich QLD
    Posts
    555
    Thanked
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    my old GTIR
    t2871r turbo
    hybrid front mount
    upgraded fuel pump
    tuned to 16psi
    3inch turbo back exhaust

    Click image for larger version. 

Name:	kws.jpg 
Views:	382 
Size:	74.6 KB 
ID:	1117

  11. #11

    Join Date
    Oct 2015
    Location
    Earth
    Posts
    555
    Thanked
    46
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    @Ethanolaholic
    I believe you now have something that belongs here

  12. The Following 3 Users Say Thank You to Boosted VLAD For This Useful Post:

    BaronVonKebabalot (28-01-2016), Ethanolaholic (01-06-2016), Paullus (26-01-2016)

  13. #12

    Join Date
    Oct 2015
    Location
    Brisbane
    Posts
    555
    Thanked
    12
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Yes i do
    Sr20de+t, ball bearing GT2560, JWT S4 cams, e85, walbro 460 pump, 1000cc injectors. 255hp at 12psi


    Sent from my GT-I9507 using Tapatalk
    Last edited by Ethanolaholic; 03-06-2016 at 07:28 AM.
    #TEAMDAN ULLEH

  14. The Following User Says Thank You to Ethanolaholic For This Useful Post:

    BaronVonKebabalot (28-01-2016)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •