User Tag List

Results 1 to 10 of 10

Thread: SR20VE Intake Manifold Options.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    sss4me's Avatar
    Join Date
    Oct 2015
    Location
    griffith nsw
    Posts
    555
    Thanked
    67
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    SR20VE Intake Manifold Options.

    For those who have sr20ve's, and are looking to go to the next (allmotor) level, then an upgraded intake manifold might be on the shopping list. While the sr20ve head flows good numbers. the factory intake has a reverse taper to it, which hurts flow at higher rpms, hurting hp.

    so here's a bit of a list of available intakes suitable. i've spent a few years researching these, and read a stack of forums posts on the subject. the ideal combination of right runner length, right runner diameter, right throttle body, right plenum volume, right camshaft duration, to catch the helmholtz benefit of overfilling cylinders will drive you nuts. Best practice is to find an intake with no reverse taper, or slight positive taper , ideally 5.5 to 9 inches long, depending on your application , ideally with around the 5 to 5.5cm diameter runners, that perfectly mates to the intake ports of your cylinder head. ideally find yourself a 70mm throttle body or larger. ideally you want around a 18-24 inch intake pipe feeding air to that, at least 3inch in diameter.

    There's a lot of talk as to when the standard intake manifold becomes a restriction. if your running standard compression with n1 cams, then read no further, its not going to change much below 7k rpm.

    if you want a non trumpet runnered intake, you will want to port the runners/plenum floor like the below example. here's a ported standard sr20ve xcessive plenum.

    Click image for larger version. 

Name:	payu.jpg 
Views:	292 
Size:	50.4 KB 
ID:	845

    ported n1 manifold. ugly but very effective. 7 inches, good for mating to an n1 throttlebody. runners do need to be ported, otherwise pretty much zero improvement.

    Click image for larger version. 

Name:	N1Portedmanifold002 (1).jpg 
Views:	859 
Size:	86.5 KB 
ID:	846

    Click image for larger version. 

Name:	ported n1.jpg 
Views:	505 
Size:	97.1 KB 
ID:	847

    custom xcessive manifold, using standard sr20ve intake base, runners to your spec, xcessive plenum.

    Click image for larger version. 

Name:	xcessive custom.jpg 
Views:	1272 
Size:	129.3 KB 
ID:	848

    n1 xcessive. port your n1 runners, mated to plastic spacer/bellmouths, with xcessive plenum. bellmouths have history of separating under load (me included) 9 1/4 inches long.

    Click image for larger version. 

Name:	intake.jpg 
Views:	411 
Size:	69.5 KB 
ID:	849
    Last edited by sss4me; 27-09-2017 at 10:47 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •