Search:

Type: Posts; User: sss4me

Page 1 of 11 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thread: Spark Plugs

    by sss4me
    Replies
    3
    Views
    198

    unless you got some serious mods (like 12-1+...

    unless you got some serious mods (like 12-1+ pistons), your current plug is fine.
  2. Thread: Fuel Additive

    by sss4me
    Replies
    6
    Views
    658

    yes, that will do. 1/4 remove the aicv hose from...

    yes, that will do. 1/4 remove the aicv hose from the rubber intake pipe b4 the throttle body, and spray into the throttle body whilst the motor is going.
  3. https://i.imgur.com/dPd9rro.jpg...

    https://i.imgur.com/dPd9rro.jpg
    https://i.imgur.com/HITr8VI.jpg
    https://i.imgur.com/KFdX7fs.jpg
    https://i.imgur.com/mSAGz67.jpg
    https://i.imgur.com/2hCbEa2.jpg

    part numbers for all the 10an...
  4. https://i.imgur.com/yyVrk7O.jpg fitted up with...

    https://i.imgur.com/yyVrk7O.jpg

    fitted up with both defi and oem oil pressure/temp sensors
  5. pic of the oil block adapter,with the extra npt...

    pic of the oil block adapter,with the extra npt thread tapped for the oil temp sensor, and how it looked with the aeroflow AF849-10-10 & AF840-10 fittings in it.

    https://i.imgur.com/gyxDBmXl.jpg
  6. Replies
    9
    Views
    899

    steering locks dont work. me, hack saw, 1 min,...

    steering locks dont work. me, hack saw, 1 min, and its gone.

    alarm, kill switch, tracker. or remove the rotor plug every time you leave the car.
  7. its the same thing. mine has both bsp and npt,...

    its the same thing. mine has both bsp and npt, and i tapped another npt to replace a sandwich plate for my defi oil pressure/temp sensors
  8. quick update. been having issue's with the oil...

    quick update. been having issue's with the oil filter block developing small fractures and leaking oil everywhere. always wanted to fit an oil cooler, so i went it this direction. first is an...
  9. Thread: Upgraded Cam

    by sss4me
    Replies
    23
    Views
    1,365

    sss automotive has them, some members bring them...

    sss automotive has them, some members bring them in / export sometimes, like pten developments in nz
  10. Thread: Upgraded Cam

    by sss4me
    Replies
    23
    Views
    1,365

    you buy a complete ve motor (say 2.5k). you pick...

    you buy a complete ve motor (say 2.5k). you pick up better pistons, better oiling system, higher comp, and (far)less headaches. add some n1 cams, headers, and ecu, and your all good.
  11. Thread: Upgraded Cam

    by sss4me
    Replies
    23
    Views
    1,365

    no point going bigger than s4's without bumping...

    no point going bigger than s4's without bumping comp/headwork/new intake manifold. its cheaper to start modding a ve.
  12. Replies
    7
    Views
    682

    uk not usa. google.

    uk not usa. google.
  13. Replies
    7
    Views
    682

    211 kilometers= 131.1 miles 12.12 litres = 3.196...

    211 kilometers= 131.1 miles
    12.12 litres = 3.196 gallons
    131.1/3.196= 41mpg.
  14. Thread: Upgraded Cam

    by sss4me
    Replies
    23
    Views
    1,365

    your overthinking it. people (like me) have...

    your overthinking it. people (like me) have buggered around on a dyno for hours trying all kinds of difference centrelines to make more power, but 9 times out of 10, with the aftermarket cams ground...
  15. Thread: Upgraded Cam

    by sss4me
    Replies
    23
    Views
    1,365

    the high lift will bring small performance gains....

    the high lift will bring small performance gains. not much. to make big performance you need more (lots more) duration. and a ve motor. the end.
  16. Thread: Upgraded Cam

    by sss4me
    Replies
    23
    Views
    1,365

    again,save the $$$ on not buying cam gears, and...

    again,save the $$$ on not buying cam gears, and buy stuff that will raise hp.

    i actually tried this on my de when i had it. made bugger all difference. if you can feel 2-3hp, your doing better...
  17. Thread: Upgraded Cam

    by sss4me
    Replies
    23
    Views
    1,365

    dont bother with cam gears. these cams run on...

    dont bother with cam gears. these cams run on factory centrelines. you most probably wont see any gain by moving them.

    with the standard de intake manifold, the power will be all over before 7k....
  18. Replies
    2
    Views
    404

    unless its the best conditioned pulsar in...

    unless its the best conditioned pulsar in australia, and you want it as a museum piece, swap the motor.
  19. Wanted been a par dog box 4sale of the pga and pog f/b...

    been a par dog box 4sale of the pga and pog f/b for ages. ‎Ryan Bestulic‎'s .3k. dunno about the lsd but
  20. Replies
    5
    Views
    642

    dba imo the best rotors. quality wise. good pads...

    dba imo the best rotors. quality wise. good pads are the most important buy though. fresh brake fluid and braided brakes lines are helpful

    i like project mu pads, but there are plenty of quality...
  21. Replies
    11
    Views
    1,145

    254013m101 now go buy the good second hand one!

    254013m101

    now go buy the good second hand one!
  22. Replies
    11
    Views
    1,145

    parts guru nz and buy a jdm one (central locking...

    parts guru nz and buy a jdm one (central locking button doesnt work)

    https://www.partsguru.co.nz/index.php?page=listingDetails&categoryid=248&sco=76&collectionid=&prodid=897&pageNum=3&x=52&y=13
  23. Replies
    10
    Views
    1,161

    common issue. new genuine oring for the win. mark...

    common issue. new genuine oring for the win. mark your timing before you take it out.
  24. Replies
    2
    Views
    428

    dont mix the dots. use dot 4 , completely bleed...

    dont mix the dots. use dot 4 , completely bleed the whole system,start with the caliper furthest from the master cylinder to the closest one, never run it out of fluid though, and NEVER depress the...
  25. Thread: Ecu Options

    by sss4me
    Replies
    3
    Views
    653

    nistune on a gtir ecu or n14/n15 ecu with a gtir...

    nistune on a gtir ecu or n14/n15 ecu with a gtir basemap.done.

    big shoutout to haltech if you do happen to get some cash together.
Results 1 to 25 of 258
Page 1 of 11 1 2 3 4