Printable View
Hi there, I have an N14 SSS and have a pair of r33 gtst calipers I want to fit, I have read that you need n16 hubs but the problem is that the calipers don't mount to the hub and they mount to the knuckle. I'd appreciate someone to shed some light on the upgrade for me. Cheers.
Anyone? Cheers
basically you need your choice of caliper, matching rotors milled down a TOTAL of 8mm off the diameter, then redrilled to 4x100, same as the studs will need to be. n16 hubs to fit the calipers too (bigger brake mounting hole size) . rims to suit the new rotors
theres a thread in the tech section explaining it all.
Also another question is, I have an n14 and want to put a32 maxima rears on however for n15s I know they are bolt on but n14 I imagine the same except the rotor heights are different. Would they fit or would I need a spacer for the rotor because n14s are 40mm height with 7mm thick disc so 33mm hub height and maximas are 45mm height with 9mm thick disc so 36mm hub height? CheersQuote:
Originally Posted by sss4me