Thought this might be of interest to those with EGR deletes... Finding an M24x1.5 bung for the hole in the exhaust mani has been an absolute prick, tried Nissan, nope, order in and $30 or something....
Thought this might be of interest to those with EGR deletes... Finding an M24x1.5 bung for the hole in the exhaust mani has been an absolute prick, tried Nissan, nope, order in and $30 or something....
bosch-style 1000cc injectors should be enough for 200kw on E85. but you're still side feed injectors? might be worth converting to top feed due to the price/availability of side-feeds.
If you dont...
Replace the thermostat, that's the only way. Bitch of a job compared to the SR20DE motor too i hear. By all means test it while its out, but if you're pulling it out, you may as well just replace it...
0.8mm gap is a good start for turbo and should be fine for your boost levels.
I generally stick with NGK brand. Heat range would be fine at 6 or 7 depending on how hard/hot you push it.
I stick to...
Shouldve bought the house instead man ! (seriously though, holy crap!!)
Cabin Filters were never fitted to Australian models. You have to do the mod as described in the tech section to add it, otherwise there's just no filter there at all.
I have done this,
- underneath you glove box (the hinges) there are some 'L' shaped pins that hold the glove box in place.
- the resistor is inside the WHITE container where the fan is located...
N14 an and NX shafts are the same
N15 shafts are longer than N14 shafts,
BaronVonKebabalot and I have 100% confirmed this by comparing our shaft width and length side by side (if you know...
I just put a VE in to make it easier, now i don't have any problems.
KYB AGX Damper adjustable shocks are probably the best thing you can get for an N15. However, there's a couple of downsides.
1) Cost. They're not cheap as you have to order them from the USA and...
In my jappy, I have had all 4 radiators, 10mm, 16mm, 26mm, 50mm alloy,
I prefer the 26mm as it allows me to use stock fans, clear everything, and it was half the price of the 50mm ones, and the car...
I've been looking into this. We have an option in the forum control panel which can change the default thread view for a particular forum.
For future reference in the forum backend this is listed...
Can you provide more information please? Does it just have a link to the attachment?
EDIT: Don't worry I found a thread where it's happening....