Ah well hopefully it fixes it self. If not, then old school is the way to go.
Ah well hopefully it fixes it self. If not, then old school is the way to go.
I tried that and still nothing.
Hey, today I disconnected my battery and performed some work and when I was done the central locking wouldn't work with the remote. The system is NISS. I'm not sure if it could be the remote or what...
Hey guys, my radiator on my N14 SSS has a small crack in the plastic and need a new rad. I am looking into to getting a 26mm Thick alloy rad to prevent this from happening again however I cannot find...
I have been thinking about getting some hurricanes in place of my crappy 4-2-1 header on my n14 currently, as they constantly leak at the 4-2 join and i have no idea what company made them(Chinese...
I contacted Cometic Aus about a kit and quoted me about $80 for a bottom end kit and about $280 for top end with head gasket and $110 without.
Part Numbers for Cometic:
Top end without H/G - C4454...
Also another question is, I have an n14 and want to put a32 maxima rears on however for n15s I know they are bolt on but n14 I imagine the same except the rotor heights are different. Would they fit...
Anyone? Cheers
So I removed the air baffle for the intake which gave me a lot more space to work with. I made a bracket out of 3mm alloy plate to mount the coil which then the bracket then mounts to the baffle...
If your using a crane lx91 coil in an n14, how did you mount it? It looks like Stevenson has his attached to the air box but not sure. I don't really want to drill holes in a perfectly fine engine...
Hey, how did you mount your coil? Mine came with a bracket and might need to drill some holes. Cheers
Does anyone know if the crane lx91 coil is still being sold or have they changed brand names or anything. Found a couple on ebay after searching called fast but they look the same as the crane. Just...
Hey, I've read a post on here about upgrading the ignition system on the sr20de by using a crane lx-91 coil with new leads ( thinking of TopGun leads ). Im currently running NGK BKR6E spark plugs...
Hey guys, on my 91 N14 SSS SR20DE the fans don't kick on at all. I've done testing too find the problem first started by checking the fuses(all good), then checked for power with a multimeter on the...
Subaru Cleaner? Is that just as good as the intake cleaner you get from auto stores?
Yeah that sounds like the better idea, where can I source an engine?
Did you get your cams degreed and adjust them from there? Or did you just drop them in and adjust and hope for the best because I imagine it would get frustrating having to take off the rocker cover...
Would I need the cams professionally degreed? As from reading about installing aftermarket cams and that you should but I think it should be fine as long as it's in time. This is another reason I'd...
Thanks for the replies. Im thinking JWT cams is the way to go but does anyone know about the S3HL cams? They're just .4mm more in lift but am unsure if they'd benefit over the standard S3. I didn't...
G'day fellas, I know there's already a thread about cam specs but I just want some more info. I'm looking at putting some cams in my 91 N14 SSS SR20DE and I have a couple in mind and wanted to know...
G'day, Does anyone know of any places that sell a full gasket/ reseal kit for the SR20DE from and n14 pulsar? I only want to reseal the engine and not change the head gasket so everything around it....
Hey Guys.
I have a 91 N14 SSS Pulsar made in Nov 91 with an sr20de. My question is, I'm not sure if I should engine swap the car with the same engine because the original engine has low...