PDA

View Full Version : Drivers side Master Window Switch



MdMa
13-03-2018, 02:38 PM
So, the drivers window switch has lost it's (auto) spring, which means the window still goes up and down, it's just that the switch stays up or down and I have to manually put it back to the middle.

Now I haven't checked, but are the front switches separate from the rear switches like so?

1759

Cozzm0
14-03-2018, 06:58 PM
They're one piece you need one from a 5 door car.

sss4me
15-03-2018, 06:04 PM
parts guru nz and buy a jdm one (central locking button doesnt work)

https://www.partsguru.co.nz/index.php?page=listingDetails&categoryid=248&sco=76&collectionid=&prodid=897&pageNum=3&x=52&y=13

MdMa
16-03-2018, 11:45 AM
parts guru nz and buy a jdm one (central locking button doesnt work)

https://www.partsguru.co.nz/index.php?page=listingDetails&categoryid=248&sco=76&collectionid=&prodid=897&pageNum=3&x=52&y=13

Awesome, but $35 shipping.. ouch.

Would anyone happen to know the part number, maybe Amayama might have one?

sss4me
16-03-2018, 01:01 PM
Awesome, but $35 shipping.. ouch.

Would anyone happen to know the part number, maybe Amayama might have one?

254013m101

now go buy the good second hand one!

MdMa
16-03-2018, 01:49 PM
254013m101

now go buy the good second hand one!

Okay... AUD $275 before shipping...

Second hand it is! :)

Leroy Peterson
16-03-2018, 03:40 PM
lol $35 is a steal

oh thats just shipping, sorry

MdMa
16-03-2018, 04:45 PM
lol $35 is a steal

oh thats just shipping, sorry

I wish.. the whole thing cost me $101 :(

MdMa
16-03-2018, 04:46 PM
Whilst we're here...

I can't remember exactly how to get the window switch panel off the arm rest/door card..?

Cozzm0
16-03-2018, 05:06 PM
gently slide a paddle pop stick down from the front edge and it will lift out from the front edge.

sometimes you can just pull it up from the front, but other times they're kinda stuck in there. no need to remove the trim.

MdMa
16-03-2018, 05:15 PM
gently slide a paddle pop stick down from the front edge and it will lift out from the front edge.

sometimes you can just pull it up from the front, but other times they're kinda stuck in there. no need to remove the trim.

What is considered the "front" edge... 1 (mostly off screen) or 2?

1760

Cozzm0
16-03-2018, 06:06 PM
1 is front edge, there is a spring clip about 10mm above the two other buttons. if you push the whole unit back and forth (towards front of car then towards back of car) you should fee the springyness.

If you pull it up too hard without disengaging the clip that holds it into the trim, it will crack the plastic top piece(which is separate to the switch gear)