PDA

View Full Version : SR20VE Swap



mezje
10-07-2017, 05:15 PM
My mate has a N15 with a VE in it and LSD box (32V?) we are planning to swap as he is looking at selling and the VE isn't adding much value. I have been chasing a VE for a while too so this is good timing.

With the swap I know we need the loom but thats about it besides the motor, are the driveshafts the same (mine are new and I would rather retain them), anything else to note?

sss4me
10-07-2017, 06:24 PM
you will need to swap both the loom and ecu over, and whatever happens to switch the cams over if its not the ecu.

the passengers side cv is different, if indeed its a 32v gearbox. the easiest way to tell this is look for the bulge in the casing where the passenger side cv goes into the gearbox.

http://i.imgur.com/l13mCvK.jpg

mezje
10-07-2017, 07:28 PM
Hmm sweet, yeah we are swapping complete loom, box everything so should be no issues hopefully! My shafts are brand new so I would prefer to retain them.

sss4me
10-07-2017, 11:40 PM
Hmm sweet, yeah we are swapping complete loom, box everything so should be no issues hopefully! My shafts are brand new so I would prefer to retain them.

drivers side yes, passengers side no (if its a 32v)

http://i.imgur.com/egPfNhh.jpg