PDA

View Full Version : SR20 Catch can questions



tatesn14sr20
21-06-2016, 09:19 AM
hey guyss

So My PCV Breather on my rocker cover to the inlet manifold all those hoses are cracked.

1 -=----- So, can i loop the manifold, block the pcv outlet and just run the OEM catch can at the other end??

2 ---------- Do i run a aftermarket catch can from the breather out to can and then from can return to the inlet manifold?

3 -------- What other options do i have?

Leroy Peterson
21-06-2016, 10:30 AM
SR20-forum have a thread for turbocharged and NA engines (theory is the same though). The diagrams are not the only options but the most common and functional.

http://www.sr20-forum.com/showthread.php?t=44727

I have my own sort of setup and hope to put it through its paces this year so will post up when it's all sorted

Sent from my HTC_One_mini_2 using Tapatalk

PhilSSStevenson
22-06-2016, 11:55 AM
Do what I have done.

Note:

1. ERG stuff all removed. Made a plate to cover the intake manifold slot.
2. K&N filter on right of cam cover.
3. Line from PCV valve going to a oil catch can, then back though a basic filter.

Never had an issue.

0 - 100 in 6.9 seconds.

1389