View Full Version : Removing Rear Garnish
mezje
03-05-2016, 11:14 AM
Is the rear garnish where it says P U L S A R removable? I want to grind off the letters and repaint it.
BO05TT
03-05-2016, 11:18 AM
yes, from memory there are three clips that hold it in place, just remove the inner trim and squeeze/poke it til it pops out, use a sander coz its plastic
sss4me
03-05-2016, 11:45 AM
you have to first remove the side, then the rear plastic trims from the tailgate (flat screwdriver for the clips), then there are 3 x 8mm? nuts that attach it to the rear hatch.
Cozzm0
03-05-2016, 12:25 PM
I'm pretty sure the jap/euro version is flat already (if you wanted to buy one of those first).
As enzo said, they're held in with 3 nut/bolts. bolt is in the garnish, nut accessible inside the back of the hatch.
mezje
03-05-2016, 12:41 PM
Interesting, not sure how easy it will be to source a Japanese one though, I am planning on repainting a 2-slat grille I have so I may as well do the garnish at the same time. Reckon 400 grit will be enough to sand off the letters?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.