nharv88
18-02-2016, 05:11 PM
Hi everyone, i currently have a N15 SSS S2 with about 240,000km on it and a GTiR with 200awkw that i had started to part out. I am looking at installing the GTiR motor intop the SSS but seeing as the forum shut down and restarted we seem to have lost A LOT of the knowledge of the forums :(
GTiR specs:
balanced and blueprinted engine
knife edged crank
9.0:1 compression
720cc injectors
272/272 cams
Apexi adjustable fuel reg
GT28RS
Z32 AFM (not installed but plug has been spliced in)
3" turbo back exhaust (doubt it will fit N15)
whiteline bushes and braces front and rear (heard that the rear antiroll bar will fit N15 SSS)
FMIC (guessing i will need new piping, am i right?)
Power FC
Apexi AVCR
Anything else usable? Radiator & Piping? Suspension?
apart from the following:
- have the flywheel for the SSS machined and the holes expanded 1mm
- new HD clutch
- Cooler piping?
- Exhaust?
Is there anything else i will need?
Will also be looking into N16 hub/Skyline brake upgrade (R34 GTT Hopefully. will they fit under 17" rims?)
Quad tail light LED conversion
Suspension
VZR Goodies (Grill, Bumpers, Side Skirts. i like the SSS Lights and indicators)
Is the wiring plug and play or close to it? ive only ever done straight swaps. but a few people (that have done conversions but on skylines and silvias, RB/SR/JZ etc) say it should only be 4-5 wires that need to be done. is this true?
Thanks in advance :)
GTiR specs:
balanced and blueprinted engine
knife edged crank
9.0:1 compression
720cc injectors
272/272 cams
Apexi adjustable fuel reg
GT28RS
Z32 AFM (not installed but plug has been spliced in)
3" turbo back exhaust (doubt it will fit N15)
whiteline bushes and braces front and rear (heard that the rear antiroll bar will fit N15 SSS)
FMIC (guessing i will need new piping, am i right?)
Power FC
Apexi AVCR
Anything else usable? Radiator & Piping? Suspension?
apart from the following:
- have the flywheel for the SSS machined and the holes expanded 1mm
- new HD clutch
- Cooler piping?
- Exhaust?
Is there anything else i will need?
Will also be looking into N16 hub/Skyline brake upgrade (R34 GTT Hopefully. will they fit under 17" rims?)
Quad tail light LED conversion
Suspension
VZR Goodies (Grill, Bumpers, Side Skirts. i like the SSS Lights and indicators)
Is the wiring plug and play or close to it? ive only ever done straight swaps. but a few people (that have done conversions but on skylines and silvias, RB/SR/JZ etc) say it should only be 4-5 wires that need to be done. is this true?
Thanks in advance :)