SOO510
20-10-2015, 06:32 PM
My N15 Pulsar didnt come with speakers in my rear doors, i have already upgraded all speakers in the car aswell as changing the 6.5" parcel shelf speakers to accomodate 6x9's
Here is how i installed speakers in the rear doors for under $100
Step 1 : remove rear door cards
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_143207_zpspj5kjqdl.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_143207_zpspj5kjqdl.jpg.html)
Step 2: Mark out where you want to put the speakers, i mounted the speakers to MDF speaker spacers
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_143630_zps7yo9bsqv.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_143630_zps7yo9bsqv.jpg.html)
Step 3: Measure your door card, i made a quick template
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_144142_zpsrndlinqb.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_144142_zpsrndlinqb.jpg.html)
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_144149_zpsugz5um2d.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_144149_zpsugz5um2d.jpg.html)
Step 5: mark where to cut then cut the hole for speaker
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_144154_zpsymdwulwc.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_144154_zpsymdwulwc.jpg.html)
Step 6: CUT! measure twice cut once remember!!
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_150853_zpsqnpsnvrz.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_150853_zpsqnpsnvrz.jpg.html)
looks a little rough but had to use a angle grinder as my dremel broke. doesnt matter i sanded it down and you cant see the cut anyway
Step 7: Mount speaker spacer to door using the 4 screw holes made for speakers
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_151541_zps8d757qmz.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_151541_zps8d757qmz.jpg.html)
Step 8: Use 4 screws to mount speaker to speaker spacer
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_152556_zpsrk1vcr3v.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_152556_zpsrk1vcr3v.jpg.html)
Step 9: TEST!
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_153401_zpsjmqjeb14.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_153401_zpsjmqjeb14.jpg.html)
Step 10: if all works then mount the door card back on the door and run the wiring, i ran the wires to my amp but then changed it to the wires on my 6x9s as it sounded more clear and louder.
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151020_142646_zpsidrh44le.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151020_142646_zpsidrh44le.jpg.html)
Here is how i installed speakers in the rear doors for under $100
Step 1 : remove rear door cards
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_143207_zpspj5kjqdl.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_143207_zpspj5kjqdl.jpg.html)
Step 2: Mark out where you want to put the speakers, i mounted the speakers to MDF speaker spacers
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_143630_zps7yo9bsqv.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_143630_zps7yo9bsqv.jpg.html)
Step 3: Measure your door card, i made a quick template
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_144142_zpsrndlinqb.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_144142_zpsrndlinqb.jpg.html)
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_144149_zpsugz5um2d.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_144149_zpsugz5um2d.jpg.html)
Step 5: mark where to cut then cut the hole for speaker
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_144154_zpsymdwulwc.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_144154_zpsymdwulwc.jpg.html)
Step 6: CUT! measure twice cut once remember!!
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_150853_zpsqnpsnvrz.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_150853_zpsqnpsnvrz.jpg.html)
looks a little rough but had to use a angle grinder as my dremel broke. doesnt matter i sanded it down and you cant see the cut anyway
Step 7: Mount speaker spacer to door using the 4 screw holes made for speakers
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_151541_zps8d757qmz.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_151541_zps8d757qmz.jpg.html)
Step 8: Use 4 screws to mount speaker to speaker spacer
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_152556_zpsrk1vcr3v.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_152556_zpsrk1vcr3v.jpg.html)
Step 9: TEST!
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151019_153401_zpsjmqjeb14.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151019_153401_zpsjmqjeb14.jpg.html)
Step 10: if all works then mount the door card back on the door and run the wiring, i ran the wires to my amp but then changed it to the wires on my 6x9s as it sounded more clear and louder.
http://i1353.photobucket.com/albums/q667/Grant_Sanderson/20151020_142646_zpsidrh44le.jpg (http://s1353.photobucket.com/user/Grant_Sanderson/media/20151020_142646_zpsidrh44le.jpg.html)